The Christmas light projector glossary
DOE, IP65, Class 3R, RF remote: Christmas projector listings speak their own language. This page explains the 36 terms you will meet most often, each in a few sentences and backed by the figures of the projectors in our lineup.
These are the terms that keep turning up on Christmas projector boxes, listings and manuals, sorted alphabetically. Each entry points to the guide that goes deeper.
The figures come from the six projectors in our best Christmas light projector comparison. You can see them side by side in the comparison table on the homepage.
A
- Aperture
- The small window where the laser light leaves the projector. It is the one spot you should never look into, and children and pets should stay away from it while the projector runs. Why that matters, and how a laser class sets the risk, is in our guide to laser Christmas light safety.
- Aurora effect
- A soft, shifting wash of colored LED light meant to recall the northern lights, usually with laser stars on top. The Govee H7073 builds its show around an RGBW aurora under RGB laser stars. Owners are split on it, some loving the look on a house and others finding the image hard to read, as our laser or LED guide explains.
B
- Beam angle
- How wide the light fans out from the lens. A wider angle fills a bigger wall from the same spot but spreads the same light thinner. The listings in our six rarely give one and quote an area at a distance instead, such as a 5,069 sq ft claim for the Govee H7073 with 33 ft of throw; our projector distance guide turns that into a stake position.
C
- Coverage
- The area a seller says the projector can fill, in square feet. In our six it runs from the GUSODOR snowflake’s 30–500 sq ft up to the Govee H7073’s 5,069 sq ft, while the Star Shower names 3,200 sq ft but no distance. A bigger area means dimmer light per square foot, and our guide to projectors or string lights weighs coverage against effort.
D
- Diffraction grating
- A tiny optical element, also called a DOE (diffractive optical element), that splits one laser beam into hundreds or thousands of points. Because each point is a narrow beam, the dots stay sharp at any distance. Govee says the H7073 draws its laser stars through a DOE system, and our laser or LED guide shows how this differs from a gobo.
- Dusk-to-dawn
- A mode that switches the projector on when it gets dark and off at daylight, usually with a light sensor. The YUEGANG listing says “on at dusk, off at dawn”, but it describes a timer and names no sensor, while one retailer mentions a sensor on the Star Shower Ultra 9. Our guide to timers, remotes and apps sorts out which is which.
E
- Extension cord
- The lead between the projector’s adapter and the outlet. Use one rated for outdoor use, keep the connection off the ground and out of puddles and snow, and never chain cords together. The YUEGANG and the GUSODOR snowflake ship with a 16.4 ft cord, and our rain, snow and power guide covers the rest.
F
- FAA
- The Federal Aviation Administration, the US aviation regulator, wants holiday lasers pointed at the house, kept off the sky and used with added caution near an airport. A beam reaches far beyond what you see in the yard and can dazzle a pilot at the controls, and aiming one at a plane breaks federal law. The details are in our laser safety guide.
- Firefly mode
- A moving setting in which laser dots drift slowly across the wall, like fireflies on a summer night. The GUSODOR RGB Stars offers “firefly” or static dots with speed and flash control. Moving dots look lively on a house and can be distracting indoors, as our guide to projectors indoors explains.
- Focus
- Sharpening the image by moving the lens, something LED pattern projectors need and laser projectors don’t. The Govee H7071 has a focusing lens, and owners say its shapes are crisp near the wall and soften as the projector moves back. Our guide to a dim Christmas projector covers focus with the other fixes.
G
- GFCI
- A ground-fault circuit interrupter, the outlet or breaker that cuts power in a split second if current escapes to ground, through water or a person. Plug outdoor decorations into a GFCI-protected outlet, a rule the CPSC and ESFi both repeat. How to set up power outdoors is in our weather and power guide.
- Gobo
- A small disc with a pattern cut or printed into it, placed in front of the light so the lens throws that shape onto the wall. The Govee H7071 comes with 20 discs you swap by hand, from snowflakes to other holidays. Our laser or LED guide explains why a gobo image grows and dims with distance.
- Ground stake
- The spike that holds a projector in the lawn. The GUSODOR projectors and the YUEGANG ship with one, plus a base for hard ground, and some owners of the GUSODOR RGB report the mount falling off. Where to push it in is covered in our placement tips.
I
- IP rating
- The two-digit code from IEC 60529, where the first digit rates protection against dust and the second against water. A seller’s “waterproof” is not a rating, and the GUSODOR RGB Stars gives no IP figure at all. Our rain and snow guide explains which rating suits which spot.
- IP44
- Protection against solid objects over 1 mm and against splashes from any direction. It is the usual rating for the plug or adapter, as on the YUEGANG and the GUSODOR snowflake, so cover that part or keep it under an eave. The troubleshooting guide lists a wet adapter among the common faults.
- IP65
- Dust-tight and protected against water jets. The Govee H7073, the YUEGANG body and the GUSODOR snowflake head carry it, although one EU title for the H7073 says IP67. Govee wants the H7073’s adapter indoors or in an IP65-rated enclosure, as our outdoor power guide explains.
- IP67
- Dust-tight and protected against short immersion in water up to 1 m. The Govee H7071 is the only projector in our six rated IP67, which suits a spot where snow piles up or water pools. Its adapter still needs to stay dry, as the troubleshooting guide explains.
L
- Laser class
- The hazard class under IEC 60825-1, which the US FDA uses alongside its own rules. Class 2 visible lasers stay under 1 mW and the blink reflex normally protects the eye, while Class 3R allows up to 5 mW and direct viewing should be avoided. None of the lasers in our six states a class on Amazon, and one retailer lists the Star Shower as 3R, so read our laser safety guide before you aim one.
- Laser diode
- The small semiconductor chip that makes laser light. A red diode and a green one sit inside the Star Shower and the YUEGANG, and the GUSODOR RGB adds blue. The whole projector draws little power, as the YUEGANG lists 4 W and the Star Shower 7.5 W, as our laser or LED guide sets out.
- LED projector
- A projector that shines LEDs through a gobo and a lens to throw a shape, such as a snowflake. The image grows and dims as you step back, so these projectors want a shorter, sensible distance, about 10 ft for the Govee H7071 by Govee’s advice. Our indoor projector guide shows where an LED projector shines brightest.
- Light sensor
- A photocell that switches the projector on at dusk and off at dawn. A porch light or streetlight can fool it, and Star Shower owners report mixed results with the one a retailer says the Ultra 9 has. The troubleshooting guide explains how to tell a sensor fault from a dead unit.
- Lumens
- The amount of visible light a source puts out. Few Christmas projector listings give a lumen figure, and a coverage claim tells you nothing about brightness on your wall. Wall color, distance and stray light matter as much, as our guide to why a projector looks dim explains.
M
- Matter
- A shared smart-home standard that lets one device work with several platforms, from Apple Home to Alexa and Google. Both Govee projectors in our six support Matter alongside Alexa and Google Assistant, and none of the others do. Our guide to timers, remotes and apps explains what it adds.
- Milliwatt
- A thousandth of a watt, written mW, the unit for a laser’s optical output. Class 2 lasers stay under 1 mW and Class 3R goes up to 5 mW, the figure one retailer gives for the Star Shower. Don’t confuse it with what the projector draws from the wall, 7.5 W for that same model; more in our laser safety guide.
- Motion mode
- A setting that moves the pattern across the wall instead of holding it still. The Star Shower switches between motion and still, and the Govee H7073 has 3 motion modes in its app. Moving patterns look livelier outdoors and can feel busy on a bedroom ceiling, as our indoor guide notes.
O
- Overheat protection
- A cut-off that switches the projector off when it gets too hot. The YUEGANG lists one in its aluminum-alloy body. Never wrap a projector in a plastic bag against rain, because that traps heat and moisture, as the troubleshooting guide explains.
P
- Power adapter
- The box between the plug and the projector that turns mains power into the low voltage the head needs. It is often rated lower than the head, such as IP44 against IP65, and some Govee H7073 owners report a failed adapter. Keep it covered and off the ground, as our outdoor power guide explains.
R
- RF remote
- A radio-frequency remote that works through walls and windows, unlike an infrared one that needs a clear line of sight. The GUSODOR RGB’s is rated for 98 ft with a clear view, or 33 ft with walls in the way, and the YUEGANG’s 65 ft. Our guide to remotes and timers compares them with an app.
- RGB laser
- A laser projector with red, green and blue diodes, which can mix them into more color combinations. The GUSODOR RGB Stars offers 7 color modes, and the Govee H7073 draws RGB laser stars over its aurora. The GUSODOR is the three-color option in our guide to a cheap Christmas projector.
- RGBW
- Red, green and blue LEDs plus a white one, which gives purer whites and softer pastels than RGB alone. The Govee H7073 uses RGBW LEDs for its aurora wash. Our brightness guide explains why a colored wash can look dimmer than a white one.
S
- Scene mode
- A preset effect stored in an app, mixing colors, patterns and movement. The Govee H7073 offers 50+ scene modes and the H7071 58, all in the Govee Home app. How scenes fit with a timer schedule is in our timers and apps guide.
- Static mode
- A setting that holds the pattern still. The Star Shower offers still as well as motion, and the GUSODOR RGB static dots as well as firefly. A still picture is easier to line up with doors and windows, as our placement tips show.
T
- Throw distance
- The distance from the lens to the surface you light. The listings give 33 ft for the YUEGANG, the Govee H7073 and the GUSODOR snowflake, 50 ft for the GUSODOR RGB and about 10 ft for the Govee H7071, while the Star Shower gives none. Our projector distance guide explains why doubling it makes the picture about four times larger and dimmer.
- Timer cycle
- An automatic on and off pattern that repeats each day from the moment you switch on. The GUSODOR snowflake runs 6 h on and 18 h off, or 2, 4 or 6 hours from the remote, and the GUSODOR RGB 1–6 hour cycles per its bullets. Switch on at dusk to set the clock, as our timer guide explains.
W
- Water-wave effect
- A rippling light from a textured lens that makes the wall look as if it were under water. The Govee H7071 adds a water-ripple effect, and Govee notes that the ripple structure causes some color fringing. It works best on a plain, light surface, as our indoor projector guide explains.
- Wavelength
- The color of laser light, measured in nanometers (nm). One retailer lists 650 nm red and 532 nm green for the Star Shower Ultra 9, and the eye sees green as far brighter than red at the same power. That is one reason green lasers deserve extra care, as our laser safety guide explains.