Timers, remotes and apps on a Christmas projector
A projector you have to switch on by hand every evening gets forgotten by the second week. The six projectors we compare use four different ways to run themselves, and each has its quirks. This guide sorts them out, model by model.
Four ways a projector runs itself
Most Christmas projectors ship with one of four controls. A light sensor switches on at dusk, a cycle timer runs a set number of hours each day, a remote works from the porch, and an app adds schedules on your phone.
Few models have all four, and the listings are not always clear about which one they mean. The words “dusk to dawn” on a cheap listing can describe a timer rather than a sensor, so read the spec table as well as the title.
If you are still choosing, our Christmas light projector comparison covers all six. The comparison table puts their controls side by side, one row each.
Light sensors and dusk-to-dawn
A light sensor is a small cell that reads the daylight. When it gets dark enough the projector switches on, and when morning comes it switches off, so you never have to set a clock.
The weak spot is that a sensor cannot tell dusk from a shadow. A porch light or a streetlight falling on it can keep the projector off, and a dark corner can keep it on in daytime.
The Star Shower Ultra 9 is the model to watch here. Its Amazon listing does not mention a sensor, one retailer listing says it has one, and owners give mixed reports on how the sensor behaves.
The YUEGANG YG-LA-01 listing uses the words “on at dusk, off at dawn” too. Read closely, it describes a timer, and the listing does not state a light sensor at all.
Cycle timers
A cycle timer runs the projector for a set number of hours, switches off, and starts again at the same time the next day. The moment you first switch it on becomes the daily start time, so do it at dusk.
Both GUSODOR models rely on this kind of timer, and the YUEGANG has one too. The details differ by listing.
- GUSODOR Double-Head Snowflake: a 6 hours on, 18 hours off cycle, or a 2, 4 or 6 hour timer from the remote
- GUSODOR RGB Stars: 1 to 6 hour cycles in the bullets, while the spec table lists a 3 or 5 hour auto-off and a 6 hour maximum
- YUEGANG YG-LA-01: a timer described as “on at dusk, off at dawn”, with no hours given
Dusk moves by a few minutes over the weeks, so a fixed cycle slowly drifts. Restart it at dusk every couple of weeks and it stays in step with the evening.
A cycle timer usually loses its place when the power drops, for example when a GFCI outlet trips in the rain. The guide to rain, snow and power explains why that happens and how to keep the outlet dry.
RF remotes and their range
An RF remote sends a radio signal rather than infrared, so it needs no clear line of sight. That is why some listings give a range through walls, and why you can often change the pattern from inside the house.
- GUSODOR RGB Stars
- Up to 98 ft in the open, 33 ft through walls; AAA batteries not included
- GUSODOR Double-Head Snowflake
- 66–98 ft in the open, up to 33 ft through walls; AAA batteries not included
- YUEGANG YG-LA-01
- RF remote, 65 ft per the listing
- Star Shower Ultra 9
- Remote included, range not stated
- Govee H7073 and H7071
- Controlled through the Govee Home app and voice assistants
Buy AAA batteries along with either GUSODOR model, since none come in the box. Expect some misses at the edge of the range too, because owners of the Star Shower and the YUEGANG both give their remotes mixed reports.
On the RGB Stars the remote does more than switch it on. It picks one of seven color modes, moving or static, and sets speed and flash, which our GUSODOR RGB laser review covers in detail.
Apps and smart home
The two Govee projectors swap the hand remote for the Govee Home app. You get a timer and schedules on your phone, plus Matter, Alexa and Google Assistant, so the projector can join routines that already run your porch lights.
The app also holds the effects. On the Govee H7073 that means 50+ scene modes and 3 motion modes, and on the H7071 it means 58 scene modes to go with its 20 discs.
H7073 owners like the number of options but find custom layouts a little tricky. Our Govee H7073 review goes through the app in more depth.
An app needs Wi-Fi where the projector stands. Before you stake it out on the lawn, check that your phone shows a solid signal at that spot, because the app can only reach the projector if the signal does.
Which control suits your house
| Projector | Switches itself on | Remote | App and smart home |
|---|---|---|---|
| Star Shower Ultra 9 | Light sensor per one retailer listing (not on Amazon) | Included, range not stated | None listed |
| Govee H7073 | App timer and schedules | Phone app | Govee Home, Matter, Alexa, Google Assistant |
| Govee H7071 | App timer and schedules | Phone app | Govee Home, Matter, Alexa, Google Assistant |
| GUSODOR RGB Stars | 1–6 h cycles (spec table 3 or 5 h) | RF, up to 98 ft | None listed |
| YUEGANG YG-LA-01 | Timer, “dusk to dawn” wording | RF, 65 ft | None listed |
| GUSODOR snowflake | A 6 h on, 18 h off cycle, or a 2, 4 or 6 h timer | Yes, 66–98 ft | None listed |
An app timer is the most predictable, since it follows the clock rather than the light. A cycle timer works well once you start it at dusk, and a sensor is handy as long as no other light falls on it.
Placement matters for sensors and remotes alike. Our seven placement tips cover where to stake a projector so the sensor sees open daylight and the remote still reaches.
The Star Shower’s remote and sensor are part of why it still leads our list. The top pick section weighs them against its other strengths.
A plug-in timer as a backup
A projector with no timer, or one whose timer you don’t trust, can run from an outdoor-rated plug-in timer or smart plug. Set it for dusk and bedtime, and leave the projector itself switched on.
Test this once in daylight before you rely on it. Some projectors come back on when power returns and some wait for a button press, and the listings don’t say which kind you have.
An outlet timer also trims the running cost, though the numbers are small. The projector or string lights guide works through the watts and hours, and switching off at bedtime is kind to neighbors whose windows face your wall.
When a timer or remote stops responding, the cause is often power, batteries or a lost cycle. Eight common projector faults walks through each one.
If you want a projector that runs itself
The Govee H7073 keeps its timer, scenes and smart-home routines in one app, so it follows the clock rather than the light. It sits at the top of the $$ band, needs Wi-Fi where it stands, and some owners find its custom layouts fiddly.